Rossi-Blog Comment Discussion

  • Everyone we are missing major news on JONP. According to the posters questions which have been answered "yes" by Rossi, there are many different partner companies all over the world, who all have the ability and know how to manufacture it. And in his answer to Frank, the agreements have been signed. I would cut and paste these Q&A's but I will leave that for Sam and Mark. The world is now saved and I was wrong. Rossi is the most brilliant scientists since Newton.

  • Everyone we are missing major news on JONP. According to the posters questions which have been answered "yes" by Rossi, there are many different partner companies all over the world, who all have the ability and know how to manufacture it. And in his answer to Frank, the agreements have been signed. I would cut and paste these Q&A's but I will leave that for Sam and Mark. The world is now saved and I was wrong. Rossi is the most brilliant scientists since Newton.

    Oh, that's neat.

    However, most companies that make things should be able to make it, since Rossi can make it with parts off the shelf already.

  • Oh, that's neat.

    However, most companies that make things should be able to make it, since Rossi can make it with parts off the shelf already.


    One probably should distinguish making the Ecat SKL module (which is apparently not too difficult) from making the cigarette box sized controller box and also the fuel wafer. Just some days ago Rossi said even the weight of the fuel wafer was confidential.



    Everyone we are missing major news on JONP. According to the posters questions which have been answered "yes" by Rossi, there are many different partner companies all over the world, who all have the ability and know how to manufacture it. And in his answer to Frank, the agreements have been signed. I would cut and paste these Q&A's but I will leave that for Sam and Mark. The world is now saved and I was wrong. Rossi is the most brilliant scientists since Newton.


    Yeah yeah, everyone wants in now. THH is even excited about the virtual version. Perhaps Rossi will have mercy upon you and accept you into the flock? No guarantees.


    On a serious note (I think), yes indeed there has been some juicy news flowing lately from Rossi's blog.


    To summarize:

    The size, weight and power density of the Ecat SKL is compatible with air travel.

    Ecat SKL testing protocols were mutually agreed upon by Rossi and the testers.

    Testers include some customers and investors. These are global and on four continents.

    Potential customers include an electrical utility and perhaps an electric car company. Some agreements (about what, don't know) have already been signed.


    Pertinent blog extracts below


    *************

    Frank Acland

    April 27, 2020 at 7:21 AM

    Dear Andrea,

    Are you currently doing the online/skype testing you describe with just one company, or are you doing it with multiple companies?

    Thank you,

    Frank Acland


    Andrea Rossi

    April 27, 2020 at 1:39 PM

    Frank Acland:

    I am doing the test via Skype with companies of America, Europe, Asia and Africa.

    Warm Regards,

    A.R.

    ************

    ************

    Raffaele Bongo

    April 27, 2020 at 3:37 PM

    Question to Dr. Rossi

    Can you tell us if the W / P and W / V ratios of the current E-Cat SKL are compatible with land, sea and air transport.

    Best regards

    Raffaele


    Andrea Rossi

    April 28, 2020 at 5:12 AM

    Raffaele Bongo:

    Yes, they are compatible.

    Warm Regards,

    A.R.

    *************

    *************

    Frank Acland

    April 28, 2020 at 9:08 PM

    Dear Andrea,

    1. Are the companies on multiple continents who are witnessing your Skype testing prospective customers, or prospective investors?

    2. Are these companies working together, or are they each dealing with you separately?

    Many thanks,

    Frank Acland


    Andrea Rossi

    April 29, 2020 at 2:43 AM

    Frank Acland:

    1- both

    2- separately

    Warm Regards,

    A.R.

    ***************

    ***************

    Brokeeper

    April 29, 2020 at 9:35 AM

    Dear Andrea,

    (much snipped)

    You stated last November: to avoid bottlenecks, the SKL module has been designed using parts already off the shelf and are already manufactured in millions of pcs per year.

    1. Is this still true?

    2. Do these companies potentially have the capability to manufacture SKL modules?

    Brokeeper


    Andrea Rossi

    April 29, 2020 at 9:55 AM

    Brokeeper:

    Thank you for your kind words.

    Answers:

    1- yes

    2- yes

    Warm Regards,

    A.R.

    ************

    ************

    Frank Acland

    May 1, 2020 at 11:56 AM

    Dear Andrea,

    You have said that the first E-Cat SKL product will be an industrial one.

    1. Are any of your prospective industrial customers intending to use the SKL to generate electricity for their own operations?

    2. Are any of your prospective customers utilities who are hoping to use the E-Cat SKL to feed electricity to the grid?

    3. Are any of your prospective customers hoping to use the E-Cat SKL to power electric vehicles?

    Many thanks and best regards,

    Frank Acland


    Andrea Rossi

    May 1, 2020 at 1:11 PM

    Frank Acland:

    1. yes

    2. yes

    3. yes

    Warm Regards,

    A.R.

    **************

    **************

    Frank Acland

    May 2, 2020 at 5:30 AM

    Dear Andrea,

    What do you think the chances are that you will make actual deals with some of the people you are showing the E-Cat SKL to?

    Kind regards,

    Frank Acland


    Andrea Rossi

    May 2, 2020 at 11:04 AM

    Frank Acland:

    Several agreements already have been signed.

    Warm Regards,

    A.R.

    ***************

    ***************

    Daniel G. Zavela

    May 2, 2020 at 10:47 AM

    Dear Dr. Rossi,

    Glad the independent testing is going well.

    Questions:

    1- Did you design the test method or did your clients?

    2- What is the defines a “Successful Test”?

    3- What is the agreed upon target as to when the independent testing will be complete?

    Having been through an independent testing process myself, I know these can be a very tense and emotionally demanding time for you.

    I wish you the best of good luck.

    Best Regards,

    Daniel G. Zavela


    Andrea Rossi

    May 2, 2020 at 11:07 AM

    Daniel G. Zavela:

    1- the protocol has been agred upon in collaboration

    2- this has been defined in the protocol, that is under NDA

    3- same as above

    Warm Regards,

    A.R.

    **************

    **************

    Brokeeper

    May 2, 2020 at 11:50 AM

    Dear Andrea,

    It may be safely to assume these prospective client/investors/testers require the same highest NDA security for manufacturing the E-Cats.

    In risk of being the slowest brick in the pile, I have these questions:

    1. Are these companies not just capable of but also will begin to manufacture the E-Cats for themselves and distribution throughout their regions?

    2. If so, was it also a safer consideration to scatter these many global companies because of their respective understanding of its region’s IP patent law’s and in a better position to monitor and enforce those laws?

    With much respect,

    Brokeeper


    Andrea Rossi

    May 2, 2020 at 2:19 PM

    Brokeeper:

    1. yes

    2. also

    Warm Regards,

    A.R.

    ****************

    ****************

  • Mark, these developments are stupendous. I am curious, has any company or individual who works with Rossi come forward to support these extraordinary claims? One important post everyone missed is that Rossi indicated the ecat source is zero point energy, when that assertion was made (via standard JONP reader logic rules, failure to refute = agreement) Where is Axil and his crow eating contest? There is going to be a run on crow in the supermarkets when Rossi irrefutably demonstrates infinite COP on Skype, in his house with attached lab which is definitely not in Italy or the US.

  • A new energy is urgently needed, let anyone make it, so as not to pump oil from the bowels of the planet !!!!

    Нефть - это кровь планеты, надо сделать модель планеты и мы получим генератор Тарасенко, эта энергия покорит вселенную! :lenr:

  • Oppy

    May 2, 2020 at 6:52 PM

    Dr Rossi,

    how can the theoretical system proposed in

    http://www.researchgate.net/pu…nge_particle_interactions

    be valid with elementary charged particles that are point like shaped ?

    Oppy


    Andrea Rossi

    May 3, 2020 at 4:39 AM

    Oppy:

    the electric field generated by a point-like charged particle should have an intinite energy, which obviously is impossible. Point-like charged particles cannot exist.

    Warm Regards,

    A.R.




    Rossi researchgate paper is related to Oliver Consa electron model


    https://vixra.org/author/oliver_consa


    Is this model reliable and realistic ?

  • All going according to plan.


    What skeptics and and Rossiphobes here don't realise is the logical consequence of his (entirely consistent for 10 years +) strategy.


    Rossi wants to have a massively attractive industrial offering to sell in quantity before his many competitors realise he is not a charlatan.


    All the apparent scientific flakiness - e.g. claiming in the hydrofusion test that a non-working device was working because it appeared to be so when measured the wrong way is exactly calibrated to make all serious commentators think he has nothing and is technically incompetent. His spending so much time on his blog, talking to weird ECW fans, is similarly part of the act.


    I claim strong evidence for this: what actions has he ever done that do not make him look like a charlatan?


    It is all a question of time, but we can be as confident as we have ever been that he is close now to the big reveal.


    THH

  • One probably should distinguish making the Ecat SKL module (which is apparently not too difficult) from making the cigarette box sized controller box and also the fuel wafer. Just some days ago Rossi said even the weight of the fuel wafer was confidential.

    It is all simple crap, made from off the shelf parts, except the parts that are brand new materials invented just for use by Rossi to resist the pressure of 2 eV.

  • Everyone we are missing major news on JONP. According to the posters questions which have been answered "yes" by Rossi, there are many different partner companies all over the world, who all have the ability and know how to manufacture it. And in his answer to Frank, the agreements have been signed. I would cut and paste these Q&A's but I will leave that for Sam and Mark. The world is now saved and I was wrong. Rossi is the most brilliant scientists since Newton.

    Thanks for the update.

  • External Content www.youtube.com
    Content embedded from external sources will not be displayed without your consent.
    Through the activation of external content, you agree that personal data may be transferred to third party platforms. We have provided more information on this in our privacy policy.