Rossi-Blog Comment Discussion

    Quote from interested observer

    No you can’t. This is the defining attribute of a Rossi believer, namely that they think evidence is required to contend that something does not exist. The only possible evidence for lack of existence is the absence of evidence of existence. Rossi believers appear to have a defective logic gene that does not permit them to understand this.

    Brushing up on logical reasoning.


    External Content youtu.be
    Content embedded from external sources will not be displayed without your consent.
    Through the activation of external content, you agree that personal data may be transferred to third party platforms. We have provided more information on this in our privacy policy.

    "Hexadecimal system of the Clifford Algebra"? Where does he come up with this stuff? Plus he only seems to know one book, the Occam's Razor one that ripped off Mills without mentioning him.

    1. Physicist August 17, 2020 at 8:22 AM

      Dear Dr Rossi,

      the ref 12 of

      http://www.researchgate.net/pu…nge_particle_interactions

      is strictly connected with the Clifford algebra: which is the link to the theoretical system of your paper ?

      Thanks,

      Physicist

    2. Andrea Rossi August 17, 2020 at 8:45 AM

      Physicist:

      Yes, the electromagnetic four-potential [V * s * m^-1],[eV] is based on the hexadecimal system of the Clifford algebra, and the electromagnetic four potential defines the “zitterbewegung” of electrons.

      Warm Regards,

      A.R.

    Another sock puppet "Gloria" load of alimentory excrement by Rossi. Challenged by his nonsensical post about "hexadecimal clifford algebra", a sock puppet not only confirms his nonsense but raises the anty with "hexadecimal blades of space-time clifford algebra" Seriously anyone taken by this BS at this point needs to see a psychologist. Are these blades Occam's razor blades?

    1. Gloria August 22, 2020 at 5:46 AM

      Dear Dr Andrea Rossi,

      Is the electromagnetic four potential obtained in the hexadecimal blades of space-time Clifford algebra ?

      Thank you if you can answer,

      Gloria

    2. Andrea Rossi August 22, 2020 at 9:20 AM

      Gloria:

      Yes, and with these blades you can see at a glance that electro-magnetic field, charge, current and mass are parts of the same entity: this is why there is also a citation of the “Occam’s Razor” in Ref, 12 of

      http://www.researchgate.net/pu…nge_particle_interactions

      Warm Regards,

      A.R.

    "hexadecimal" does not mean "16". It is a numeric positional system for computers with 16 valued digits 0-F. Using that term for "the clifford algebra" indicates to me that he doesn't really understand it. Which is not surprising. People who know something about math and physics tend to use the correct terminology, particularly brilliant future nobel prize winners. Scammers use buzzwords they heard of to cultivate cults 😀


    Dear magician,

    what about this newest version of ecat SKam?

    Are you preparing additional lies and the new hoax to pass time to your worshipers in 2021?

    Charlatan Regards

    Probably even sam12 did not expect that his new SKL (which has been widely tested with a 3rd party via Skype (!) in the past months as we all know) would not make it to the market... Again a new version that will make the previous one obsolete. Business as usual... the crowd on ECW is again fascinated that Rossi is still able to come up with newer and more powerful versions of his gadgets, although he doesn't seem to have the slightest clue how it works....

    Probable further versions of SKam-cat:

    efficiency 96% (year 2021) then efficiency 97% (year 2022), then efficiency 98% (year 2023), then efficiency 99% (year 2024), then efficiency 99.9% (year 2025), then efficiency 99.99% (year 2026), then efficiency 99.999% (year 2027) and so on...

    Quote from zorud

    ... Again a new version that will make the previous one obsolete.



    Quote from sam12

    Following Rossi and his technology

    is an endurance test that’s for sure.


    Sam12, MarkU (or any Rossi believer)....


    Can you please provide ANY specific detail on how the SK is "better" than the QX, the SKL is "better" than the SK, etc.

    Not just "better", but specifics!


    Remember, this is the invention of the century! Minor improvements are simply not reasonable to prevent mass marketing. A customer is NOT going to say "Oh, we will wait to implement the invention of the century so we can get 2% more power out of it!" :/


    This is one of the most intriguing aspects of a Rossi believer.... you will accept and not question Rossi's continued lies when he does not provide ANY answers as to WHAT he is even "improving" upon.


    Remember, the Quark had "5 sigma" dependability! So it would not be that!

    COP? The 1MW plant had 80 according to the ERV report! That is huge... no one is going to wait for 85!


    Sincerely, please provide ANY specifics that Rossi has said the new versions are better than previous and to an extend that warrants continued delay after delay. Not what you THINK it is, not what you might dream it is, but what Rossi has actually stated! Please give any specifics at all!


    If as I suspect, you cannot give any, then you need to ask yourself why?

    Well at least A.R. Is promising this.

    1. CC August 25, 2020 at 11:29 AM

      Dear Dr Rossi,

      Do you think that photos and description of the Ecat SKL will be published this year ?

    2. Translate Andrea Rossi August 25, 2020 at 12:39 PM

      CC

      Definitely yes.

      Warm Regards,

      A.R.


      The 3rd party test with the testers being chosen by Rossi

      partner could be a game changer.

      That is if they are a legitimate

      and are actually at the presentation of the ECat-SKL.

    So it seems there are no results nor any other information from the intense 3rd party tests of the previous device during the lockdown period? What happened to this important tests? Did the device fail totally and Rossi came up with his next iteration to be tested again next week?


    Sam12,

    When will your learn? Rossi always disappoints his fans.


    The last "photo" of a Rossi "Scam" cat being tested was :


    Now this REALLY showed a lot! Remember... the MUCH hyped test and demo turn out to be in his condo living room! Or was it his kitchen? Even Frank A. could not hide his disappointment.


    Remember.... Rossi was stating at this time he had a "team", a "partner" and a "customer". He had the "robotic" factory ready to program once the "Scam" cat was finalized. YET he had the demo in his condo? You really think this logical? Come on now, you are not stupid are you?


    So, what ever happened to that unit? It was running, had passed "5 sigma?" and the customer was very pleased! He even showed the "proof" that the unit was working via the fuzzy blue light photo:


    Rossi's provided photos and demo's have been going down hill with every new "version". His lies of customers continue as none have ever came out. (Except IH... oh wait... that was in a lawsuit over fraud was it not!)


    Sincerely, can you provide your thoughts on


    1) What happened to the above unit? Photos were shown, it was hyped, a internet demo was given AND it had a BIG RED BUTTON on top! So where is that customer and unit? Why was it done in his KITCHEN?


    2)Why do you think this last "promise" will be any different from the above photos and events?


    Do not be a Charlie Brown! =O

    Bob


    Hopefully by the end of this year

    we will know if Rossi has improved

    with his presentations.


    1. Bill Conley August 25, 2020 at 3:19 PM

      Andrea,

      It was wonderful to see the confidence expressed in your response to CC about SKL photos and descriptions being made available later this year. A couple of questions about that:

      1) When do you anticipate the SKL information will become available?

      a) Before 3rd party tests

      b) During 3rd party tests

      c) After 3rd party tests

      d) At the presentation

      e) After the presentation

      2) What SKL information do you think we will see:

      a) SKL photos (reactor, cooling system, controller)?

      b) Videos of SKL in operation (during testing)?

      c) High-level schematics (e.g. drawings w/ dimensions, etc. not to include IP data)?

      d) Specifications (including electrical specs and thermal output)?

      e) Test results?

      Thanks as always for your answers. This is getting exciting.

      BC

    2. Translate Andrea Rossi August 25, 2020 at 4:46 PM

      Bill Conley:

      1- I hope within this year

      2- a,b,d,e

      Warm Regards,

      A.R.


      The third party testers being at

      the presentation.are the key.

    3. Sam
      August 19, 2020 at 1:14 PM Hello DR Rossi Can you telll your partner that
      it is important that the third party
      testers be at presentation.
      So they can explain how they
      got the results instead of getting
      the results second hand. Regards
      Sam
    4. Translate Andrea Rossi August 19, 2020 at 3:20 PM Sam:
      Thank you for the suggestion,
      Warm Regards,
      A.R.

Subscribe to our newsletter

It's sent once a month, you can unsubscribe at anytime!

View archive of previous newsletters

* indicates required

Your email address will be used to send you email newsletters only. See our Privacy Policy for more information.

Our Partners

Supporting researchers for over 20 years
Want to Advertise or Sponsor LENR Forum?
CLICK HERE to contact us.