It would be interesting if the white light reached back to the source if it was configured like a Tesla coil missing the wires using only the open cavity. At or past the speed of light on exiting the coil it may get to the source faster then the interning voltage to sustain itself.as lightning.
Interesting times.
Huh? Is this Eric Ashworth from ECW coming back from outer space?
Neg- P D
its just the last few parts to a puzzle.
you can see the passage in the stone work for the voltage to travel through. its all simple,known systems without wires.
using light or plasma .
seemed appropriate to drop it in here.
QuoteDisplay MorePatrick
August 23, 2021 at 5:56 AMDear Andrea,
It’s now less than 100 days until your presentation. The countdown has started.
...
What is left for you to prepare for the presentation?
We’re all waiting with anticipation.
Regards
Patrick
QuoteDisplay MoreAndrea Rossi
August 23, 2021 at 8:42 AMPatrick:
...
4- for what concerns my duties, not much is left to do, apart the Ecat SK, that will be presented too if we will complete its preparation
Warm Regards,
A.R.
"not much is left to do"?
Dear magician, apart the Ecat SKam do not forgot the usual puppets. 
Display MoreDear Andrea, Wow, what a spectacular event the presentation will be if you are to present all three devices! That would be a trifecta in the physics world! We all wish you success in doing so!
Good luck!
Chuck Davis
Chuck Davis:
We will present the SHLed and the SKL: it makes two, not three,
Warm regards,
A.R.
Hmmm. The SHLed. It must be lighting for outhouses.
The H stands for "Hole"
Hmmm. The SHLed. It must be lighting for outhouses.
The H stands for "Hole"
Not SHitLed?
https://www.facadeled.com/news/how-to-design-outdoor-lighting-in-ancient-town-48714217.html
QuoteDisplay MoreMichael
August 24, 2021 at 4:17 AMDear Mr. Rossi,
1- how long does the certification process of the Ecat SKL take? As long as the certification process for the ecatSKLed (nearly a year)?
2- do we have to wait until the certification process of the ecatSKL is finished before the roll-out?
Best regards
Michael
QuoteDisplay More
This is pure bullshit, we are still waiting to see from beginning 2019 about the alleged certification of Ecat SK.
Safety Certification is a big issue for sure.
Safety Certification is a big issue for sure.
When applied to the magician’s farce surely.
CC: If you will show a prototype of the SKL that will generate electric energy, whatever the amout of it, without consuming energy from an external source (self sustaining mode), this will be the most important thing of the world since centuries.
This is a fact, if that will be a fact.
RossiSez: Our Team is working 24/7 on it, now.
Mats is back from Mars.
Sam I just want to thank you vicariously in Rossi's behalf, for all the cool links on JONP that you send him about various subjects he should care about.
For example, your stories about Tesla's relatives, links about LED's that he is already supposedly an expert in, etc.
Sometimes it seems from Rossi's terse answers that he does not give them the proper attention.
For a sample response. "Thanks for the link, Warm Regards AR".
But I am here to tell you that Rossi cares very deeply about his fans interesting links, opinions, and information.
And he cares about them personally as their spiritual leader.
He is just not able to show proper appreciation since it is "premature" and he and his team are working so very hard, always making major progress.
So thank you from the bottom of Rossi's heart, as conveyed through the bottom of my soul.
Same goes for MarkU, with his fascinating links about Italian and Canadian sport teams and athletes.
100 days to Mars
There are in development nuclear batteries that are orders of magnitude lighter thanr reactors scale from milliwatts to megawatts, have energy density up to 22 Kws/Kg of isotope
which could power essentially everything space-related including propulsion and habs both in-space and on-body, ISRU, and manufacturing. Such batteries could provide 200-day Marsr roundtrips.
Storage of positrons, with energy density 2 orders of magnitude greater than
fission/fusion has been demonstrated. This is the greatest energy density available and the radiation of .5 Mev gamma is prompt with no residual.
As non-chemical sources at high power and energy levels become available, propulsive mass and energy can be separated, vice use of a fuel that provides both. Utilization of
approaches to increase conductivity enables use of non-chemical energy sources of matter as propulsive mass, including possibly regolith.
If the physics of LENR can be developed, it would allow optimization, scaling, and
safety, providing yet another candidate for a power and energy revolution with application to space faring.
Display More100 days to Mars
There are in development nuclear batteries that are orders of magnitude lighter thanr reactors scale from milliwatts to megawatts, have energy density up to 22 Kws/Kg of isotope
which could power essentially everything space-related including propulsion and habs both in-space and on-body, ISRU, and manufacturing. Such batteries could provide 200-day Marsr roundtrips.
Storage of positrons, with energy density 2 orders of magnitude greater than
fission/fusion has been demonstrated. This is the greatest energy density available and the radiation of .5 Mev gamma is prompt with no residual.
As non-chemical sources at high power and energy levels become available, propulsive mass and energy can be separated, vice use of a fuel that provides both. Utilization of
approaches to increase conductivity enables use of non-chemical energy sources of matter as propulsive mass, including possibly regolith.
If the physics of LENR can be developed, it would allow optimization, scaling, and
safety, providing yet another candidate for a power and energy revolution with application to space faring.
If any of Rossi’s econtraptions actually worked, Rossi would mean more than a small hill of beans to space exploration efforts.
But he doesn’t.
CC: If you will show a prototype of the SKL that will generate electric energy, whatever the amout of it, without consuming energy from an external source (self sustaining mode), this will be the most important thing of the world since centuries.
This is a fact, if that will be a fact.
RossiSez: Our Team is working 24/7 on it, now.
And if I had wheels, I’d be a wagon.
Display MoreSam I just want to thank you vicariously in Rossi's behalf, for all the cool links on JONP that you send him about various subjects he should care about.
For example, your stories about Tesla's relatives, links about LED's that he is already supposedly an expert in, etc.
Sometimes it seems from Rossi's terse answers that he does not give them the proper attention.
For a sample response. "Thanks for the link, Warm Regards AR".
But I am here to tell you that Rossi cares very deeply about his fans interesting links, opinions, and information.
And he cares about them personally as their spiritual leader.
He is just not able to show proper appreciation since it is "premature" and he and his team are working so very hard, always making major progress.
So thank you from the bottom of Rossi's heart, as conveyed through the bottom of my soul.
Same goes for MarkU, with his fascinating links about Italian and Canadian sport teams and athletes.
PFD
Thank you for your kind support and attention to the work of our Team,
Warm Regards,
Sam and Mark
QuoteAndrea Rossi August 28, 2021 at 2:12 AM
Dear Readers:
The presentation of the Ecat SKLed and of the Ecat SKL prototype has been postponed to December 2 2021, upon request of our Customer.
Warm Regards,
A.R.
The next delay will be:
Dear gullible Readers:
The presentation of the Ecat SKLed and of the Ecat SKL prototype has been postponed to February 30 2022, upon request of our Customer.
Warm Regards,
A.R.
QuoteDisplay MoreAndrea Rossi
August 28, 2021 at 5:37 AMLilyLover and all Readers:
Attention
I made a typo: the new date is December 10 2021, NOT December 2 !
I already corrected the typo.
Warm Regards,
A.R.
Lily and gullible believers, now the Customer said December 32
Lily and gullible believers, now the Customer said December 32
Rossi needs to get more reliable customers. His latest batch are so unreliable.
I miss the days of JM Products and James A Bass.
Rossi could really count on them. At least they had names, unlike his newest batch.
