What has been done:
- Conducted surveys and placed upon the theoretical basis
- Set up a framework concept of the new design of the cell devoid of
the shortcomings inherent in the author's version, built a small
experimental facility
- Conducted initial experiments on a small installation (light-version) is no loopback on Power
- Illuminates a plasmoid fairly stable, repeatable close to 99%
- The device is easily derived for continuous operation
- Failed to provide start-up and operation of the device in small 1.5 - 2.5 A, and the consumption of less than 600W
- The problem of electrode erosion completely solved thanks to the new cell design
- Managed to relieve the tension with a detachable coil without a drawdown of the entire system of consumption
Pictures:
Operating device, as you can see the plasma shines even through an opaque body, the thickness of the power supply wires think it is clear that the device consumes little))))) clocked up specifically for this audience)))) In the operating mode is only noticeable glow in the dark ....
The cell exploded. As
you can see nothing complicated: two fitting with soldered to it with
scraps of copper tube, electrodes, dielectric body with a through
specially shaped "removable-crimped" form factor of the solenoid coil in
Brooks. It's simple, even simpler than the Vachaeva. Thanks to my improvements could eliminate the use of side "set fire" electrodes ....
What should be done:
- To carry out a series of experiments on light-installation option
for an attempt on the loopback device power supply, including the
revision of copyright electrical circuits, if it will be looped on diet,
start to build a more powerful unit.
- Make an analysis of the produced powder and liquid using solutions
of different inorganic compounds for possible transmutation of elements
as a result of LENR
- Explore the device for pathogenic fields and radiation arising during operation
-
To begin work on the possibility of using such devices, based on my
enhancements as a "working medium" not only liquid but also the gases
that creating a purely gas-discharge device options - options plasma reactor.
A little later -reaktor cell was developed, equipped with a viewing window, with copper electrodes are replaced with stainless steel.
The appearance of the cell
A series of experiments was carried out on the cell ..
Video for "burning plasmoid" in one of the modes, survey was conducted through the upper viewing window of the cell:
Unfortunately we encountered a few problems
a purely technical nature, decided to change the form factor of the device considerably - refuse to use solutions as the working environment and move to a purely gas-discharge settings, what I mean, in principle, and I wrote in the first post topics .....
Currently developed version of the apparatus for the experiments in gases ... is the construction of the installation ...
a source : http://globalwave.tv/forum/viewtopic.php?f=40&t=485
