Clearance Items
-
-
2018 peer rewieved - perhaps a bit too long.
Interesting new names - Forsley/Pamela magic 238U wire before deuteration is an elementary MPFD, post deuteration should be an elementary MPFD AND a fast neutron source.
-
Anomalous heat-releasing phenomenon from bubbles in aluminum
-
BTW. What happened to Mary Yugo ?
-
APCO fired him due to incompetence.
-
Tap water induced radioactivity / Saint Elmo's fires
left - Armenian
right - Pnas -
LENR advocates are always bemoaning the mistreatment of the field by mainstream scientists. Respect for the field is not helped in the least by the fact that some of its most passionate supporters are equally passionate about a wide range of pseudoscience and even completely crackpot ideas. Guilt by association may be unfair or unwarranted but it is a powerful force nonetheless.
Moved as pretty irellevant to its location. Alan
-
I may have posted this before. It is from Cydonia to me via private conversations. Am I the only one finding it creepy?
Quotei know who you are
you know how to be a victim like the narcissistic manipulator you are.
I know you use a lot of different nicknames here as the last one..
You don't know it yet, but it's almost the end for you.
Power And Seduction: How The 'Narcissistic Pervert' Always Gets His Way
He/she makes others feel guilty by invoking love, friendship, family and professional conscience
He/she requires perfection from others, that they must be omniscient, fully available to him/her and this, immediately, able to answer all questions and that they must never change their mind
He/she exploits the moral feelings of others (duty, generosity, courtesy, humanism...) to satisfy his/her needs
He/she questions the competence, personality and qualities of others: he/she criticizes and devalues in order to create confusion and, afterwards, he/she judges
He/she jealous of everyone (including family)
He/she uses flattery, gifts and services to make him/herself visible
He/she constantly poses as a victim
He/she never feels responsible for anything, making others responsible for everything.
He/she does not clearly state his/her feelings, opinions, needs or requests
He/she always responds in an evasive way
He/she can change the subject without transition during a conversation
He/she avoids or leaves meetings and interviews
He/she uses indirect means, such as others, telephone answering machines or written messages to get his/her messages across
He/she invokes logical reasons to pass on his/her requests for control
He/she distorts, interprets and tells lies to hide (or discover) the truth
He/she refuses criticism and denies the evidence
He/she sometimes uses blackmail and implicit threats
He/she creates conflicts in order to manipulate those around him/her
He/she behaves differently and modifies the expression of his/her thought according to people and situations
He/she lies (including by omission)
He/she uses the ignorance of his/her opponents and tries to get them to admit that he/she is superior to them
He/she is self-centered
What he/she says does not correspond to what he/she does
He/she invokes urgency to obtain an advantage from others
He/she denies the feelings, desires, needs and rights of others
He/she implicitly rejects requests by pretending to deal with them
He/she generates feelings of unease, distress and/or lack of freedom
He/she succeeds in making others perform unwanted acts
He/she achieves his/her objectives to the detriment of others
He/she is the subject of frequent and recurrent discussions
your life as loser
-
It is from Cydoniato me via private conversations
Sorry.. I resisted SOT's private conversation invitation...it just sounded creepy to me.
-
I may have posted this before.
Sad! Heads up! Everybody (almost) deserves respect. But try avoiding to show your private situation and first - on a forum - resist your feelings - post tomorrow .
-
F....g creepy indeed.
Makes me think more and more of cydonia being some Mary Yugo like...
-
I wish I had sprung into existence in a universe without Axil Axil's BS.
-
https://www.quantamagazine.org…ical-principles-20190213/
The Born rule, which converts quantum mechanical wave functions to precise predictions, was essentially a good guess.
Can't You stick to Your own nonsense thread and flood this one ?
-
Leif Holmid "Optika Atmosfery" twins
-
Hydrogen acoustically stimulated thermal desorption from stainless steel
Presumably, the main mechanism of intensifying the gas components desorption is the compression
and tension of the metal crystal lattice and deformation of intercrystalline gaps, caused by acoustic
vibrations of the polycrystalline metal structure.
The one mechanism of the previously described acoustically stimulated thermal desorption is the
closing and opening of intercrystalline gaps, which are “open” to atoms (primarily hydrogen) in the
case when the walls of intercrystalline gaps are covered with at least one monolayer of sorbate with
high volumetric concentration CS1 (figure 1(a), right). Acoustic oscillations are closing the
intercrystalline gaps (figure 1(b), right) and causing instantaneous connection of sorbate layers on the
gaps walls, simultaneously causing heating in the area of the newly formed contact (figure 1(b), left)
up to temperature TS1=TS2, because sorption is an exothermic process. In our case we are dealing
with “collective sorption” and the contact of “groups” of molecules located on opposite surfaces [5].
This “collective sorption” process occurs at ultrasonic frequency and at the nanoscale distances. The
result of this process is instant local heating of the polycrystalline structure of the acoustically
stimulated material (figure 1(c), (d), left). Herewith, the diffusion processes take place both deep in the
metal crystal lattice ntothe and on the surfaces of the intergranular boundaries, by stretching and
compressing the crystal lattice. Finally, the described repeated a high frequency process with leads to
the appearance of pulses of the gas flow (Qd) from the gap (figure 1(f), right). At this point, the
material is not heated (temperature TS curve 10 in figure 1(f), left), because the desorption process
comes with heat absorption.
The result is the appearance of a gas release flow (Qd) from the gaps between the crystallites, as
shown in figure 2. Hence, schematically the acoustically stimulated thermodesorption can be
represented as the process movement of thermally activated atoms in shrinking and stretching crystal
lattice of metal, located in the acoustic field, and process "collective" sorption, causing the pulsed
local heating of the crystallites surfaces.
Consider the scheme of hydrogen gas evolution from the surface layer of the polycrystalline
structure of corrosion-resistant steel (figure 2) when exposed to ultrasonic vibrations [6, 7]. As shown
in figure 2, crystallite sizes are in a fairly wide range from units to tens of micrometers, the
intergranular boundaries width is from tens to tens of angstrems. Precisely in these intergranular
boundaries, the gas sorbed on the surfaces of crystals and dissolved in the metal volume is mainly
located [8–10]. Under the influence of longitudinal and transverse ultrasonic vibrations on crystallites
there are forced elastic vibrations. In this case, the width of the intercrystalline boundaries also
changes with the frequency of forced oscillations. Under certain conditions, there is a sharp increase in
the amplitude of the elastic oscillations of the width of the boundaries between the crystals. In this
case, the pulsed local heating of the surface of crystallites occurs and the mobility of "dissolved"
hydrogen atoms is increased, as described above. The gas "dissolved" in the intergranular boundaries
and the volume of grains diffuses to the surface adjacent to the vacuum medium, where its
concentration in conditions of ultra-high vacuum is close to zero, and then it is desorbed and pumped
out by the vacuum system.
-
DE 102018002060A1 2019.09.12 - Seeliger Dieter
In der Durchbruchphase der Entladung (Dauer
ps bis ns) finden in den Molekülen der zugeführten
Gase die Prozesse Ionisation, Dissoziation
und Anregung statt, es enstehen Ionen, freie
Elektronen und Radikale H, O, OH u.a., auch in
hochangeregten Rydberg-Zuständen H*, Li*, K*
u.a. - die elektrokatalytische Oxidation.
In the breakthrough phase of the discharge (duration
ps to ns) can be found in the molecules of the supplied
Gases the processes ionization, dissociation
and stimulation instead, there are ions, free
Electrons and radicals H, O, OH and the like, also in
highly excited Rydberg conditions H *, Li *, K *
et al - the electrocatalytic oxidation.
-
DE 102019102690A1 2019.08.22 - Seeliger Dieter
Die vorliegende Erfindung nimmt Bezug auf
die von Holmlid et al. eingeführte und durch umfangreiche
Experimente verifizierte Annahme der Bildung
von ultra-dichtem Wasserstoff auf Metalloberflächen
(Holmlid, L., Int. Journ. of Mass Spectrometry, 15
(2013) 1-8; Int. Journ. of Modern Physics E, Vol. 25,
N. 10 (2016) 16500853; Journ. of Cluster Science,
May 2018, https://doi.org/10.1007/s10876-018-1480-
5, Springer December 03 2018; Holmlid, L., Kotzias,
B. AIP Advances 6(2016)045111, doi: 10.1063/
1.4947276), die auch in einer Patentschrift durch
Holmlid offengelegt wurde (EP2 680 271 A1) und eine
Grundlage für das bestätigte Europäische Patent
aus der Airbus-Gruppe (EP 3 047 488 B1) bildet.
The present invention makes reference
those by Holmlid et al. introduced and through extensive
Experiments verified assumption of formation
of ultra-dense hydrogen on metal surfaces
(Holmlid, L., Int Journ. Of Mass Spectrometry, 15
(2013) 1-8; Int. Journ. of Modern Physics E, Vol. 25,
N. 10 (2016) 16500853; Journ. of Cluster Science,
May 2018, https://doi.org/10.1007/s10876-018-1480-
5, Springer December 03 2018; Holmlid, L., Kotzias,
B. AIP Advances 6 (2016) 045111, doi: 10.1063 /
1.4947276), which is also in a patent document
Holmlid was disclosed (EP2 680 271 A1) and a
Basis for the confirmed European patent
from the Airbus Group (EP 3 047 488 B1).
-
Last night, I managed a fairly flat 3.97 m/s velocity profile in a 65 mm tube, 60 cm long, with significantly lowered voltage to the San Ace blower fan. I didn’t have time to swap on the 25 cm long tube and test it. The tachometer signal seems to be still functioning at the lower voltage and reports 105.6 Hz (divide that by 2), so 3162 RPM.
I am out on another trip, so again it will be a while before I continue testing.
-
Navy Confirms Existence of 'Unidentified' Flying Objects Seen in Leaked Footage
-
I speculate the these EFOs are 47 foot EVOs. These navy plane better keep their distance or face the prospect of being transmuted..
Want to Advertise or Sponsor LENR Forum?
CLICK HERE to contact us.
CLICK HERE to contact us.