The best I can do is share the process.
The spark jumps from the botton cathode to the top cathode at each breakpoint in a constant up down through the constant figure 8 exciting a reaction within the hematite dust. After firing to remove the water, the test parts show the dust reorganizes with help of the mortar and clay. Permanent magnets create the vortex. The new created matter from the spark is infuenced to the tridal magnetic field.
This is just a part. this device needs to be attached to a block of prepared material. The magnetic field would likely only reach a few inches into the block.
Hopefully the matter will ricochet throughout a given distance within the block.
I use high temperature stove repair mortar mixed with graphite pencil lead as the cathode because of its tendency to produce fungus that will grow throughout the damp hematite dust. After the unit is built, do not heat it for 15 days. The mold/ funguse needs time to grow. cover all of it with a damp cloth
Each of the upper strike caps also have a line of carbon/mortar trapped in the clay extending from a round groove.
2 copy and cut if you would like to attempt building it.