Display MoreWe all know what LION told BobG. And BobG put it in his videos., but you have to watch them for yourself. However, I got a friend to fillet them for fuel prep methods. Here is the filet, served without garnish.
1) Extract diamond embedded nickel discs from Green 3M "Diapad" abrasive foam pads. Removal and cleaning of discs performed with modeling knife.
2) Place discs in aluminum camping pan and bake exposed to ordinary atmosphere in household oven at 200C for one week.
3) Before they can drop in temperature, drop hot discs through funnel into 100ml bottle of room temperature 99.8% purity deuterium oxide and allow them to soak for unknown duration.
4) Stack ten soaked discs into a stack and wrap with copper magnet wire (enamel still on and not removed) directly in contact with the discs. Copper wire not always used inside the tube.
NOTE: I've been informed that this interior copper isn't used by LION in all of his tests and it is not required.
5) Insert stack of ten discs wound with magnet wire into single ended LFH alumina tube of 136mm in length.
6) Insert 7-7.5cm long bolt into alumina tube to eliminate free space and keep discs at bottom. Seal bolt with high temp epoxy or alumina cement.
7) Wrap bottom 1-1.5cm of alumina tube with silver foil. ( x-ray emission foil)
Wrap two layers layer of copper wire over the silver almost the entire way up to the sealed bolt.
9) Take temperature up slowly to 850c (?) - over maybe 12 hours - Cycle from 500-800C for days.
Do you have any reason to believe this Lion recipe is different from the many others before?
