MFMP:LFH - LION2 100% Replication well beyond LION1

  • This article is about natural Quartz, which may contain various impurities that yield different colours when irradiated and baked. Manufactured Quartz will -depending on the source of the quartz sand normally used - also contain impurities which will yield certain colours. This is not surprising at all, and in many ways not particularly useful. We have controls for this phenomenon already. Unused tubes.

  • magicsound


    There's no water- even the tube cement plug was dry. The quartz tube is a previously used one and merely a little milky. It's direct from the same manufacturer as the others though. There's no heavy water anywhere, and the exposed end is plugged with alumina wool - which has collected some carbon-smoke from the ingredients and discoloured a little.


    You reactor is packed an waiting for collection btw - spare thermocouples, fuel tubes and also a spare quartz liner and heating coil are in the box. Its calibrated pretty closely - just a few degrees difference between ports at 800C. However, I calibrated it with thermocouple inserted in the front, you will need to re-check using the 2 internal tc's. If there is significant variation shorten the coil in the coolest tube- but not by more than 1cm at a time. Allow at least 2 hours for warm-up before calibration and avoid drafts. ;) I'll send tracking details when the system goes live.

  • magicsound


    There's no water- even the tube cement plug was dry. The quartz tube is a previously used one and merely a little milky. It's direct from the same manufacturer as the others though. There's no heavy water anywhere, and the exposed end is plugged with alumina wool - which has collected some carbon-smoke from the ingredients and discoloured a little.


    Thanks for the shipping schedule, much appreciated.

    This is the apparent water I was asking about. I suppose it could be chips in the quartz tube itself.


  • Can someone provide a link to a description of this "LION" experiment? What did they do?


    The MFMP group on their twitter page promotes the bogus and ridiculous "Hutchison Effect" by the ignorant crank John Hutchison. That MFMP believes Hutchison's nonsense indicates scientific illiteracy and incompetence. Anyone that believes the Hutchison garbage sucks at science.

  • http://e-catworld.com/2018/02/…on-reactor-by-alan-smith/


    OK so it looks like in this experiment a bunch of (seemingly random) chemicals and metals were packed in a tube and heated to 800C. There was no calorimetry. What is the point of this experiment? Looks worthless to me.

    So the metals oxidized and there were some chemical reactions. Thats predictable and expected.

    This experiment would appear to have zero scientific value.

  • Just for the context, the many critics agains LENR experiments since F&P, and also for Rossi, was about "Control experiments". Especially in unknown domain, control are essential, as are calibration.


    Many critics are thorwn that could be simply rejected with a good control, and to be honest some critics are sent even despite the control... the charm of denial.


    As I've learned from experimenters, science is a slow boring process, where the "hourah" are suspended for verification, replications, recalibration, peer review, for months if not years...

    With a good director, I'm sure experimental science could be on Netflix in the Swedish Thriller category.


    Don't hold you breath, but prepare the coffee and the sandwich, if not the camping bed.