The EZ way
build them in foam, brush them with fireplace mortal ,heat them til the foam is gone, fill them with mix. and salt water. add more fireplace mortal to the bottom "still wet' and place them.
with luck the magnet wave attached to the steal bits will keep things moving.
still a way's to go...
Before I forget again..
I called it a chain reacting push and pulling. the steel bits together with aluminum between them and letting the chain let go in cycles
Very long tube of steel and aluminum bits/ 'not dust".. thinking of coffee cream powder and a flame going boom.when the bits are to small with room to expand.
As I procrastinate..
mortar lined with iron dust, as for the rest of it I have no idea
chunk of hand rail. from a scrapped cruise ship,
silvery looking stuff ect to add to the Steel and Aluminum
still need a vapor box to drop it in.
Still all low volt to the blender magnetism
Did not help much for the capacitor captivator box but....
https://people.maths.bris.ac.uk/~macpd/ads/cycles-lectures.nb.pdf
From all the RC aircraft work and tunnel hall prop work, building surface piercing props ect.
Notes about the boat prop work and RC plane prop pitch/rake vortex ect. - washing machine bla bla bla
wing tip vortices video - Google Suche
using magnetic fields like a fluid ground effects vortex from a flat plate ect.
Similar to the EVO..
Just Just a over grown Tesla Coil using the spark to heat water.
Its magnetite's / decay metals are used as the Bla bla bla
Should be simple to understand at this point.
Pre dry all the mixed metal magnetic primary or they will pop.
And that what its all sitting on is the capacitor. It bites..
Added
Some details and what I think is going on.
I wax the aluminum sheet 4'x8'
i lay out the cloth full size of the plank.
I mix the resin and hardener
poor the resin over the cloth and use a swimming pool round foam noodle cut in 1/4s to get the air bubbles out of the cloth and let dry.
If I wait a day or a week its the same.
If I pull the glass sheet slowly not much happens but the faster I pull the glass the larger the spark.
what I think is going on..
A small reaction from the resin and the chroming on the cloth and the aluminum builds a very small charge and gets trapped in the very small bubbles in the glass, as i pull, the bubbles brake releasing each charger into the aluminum until it grows and seeks a ground and jumps.
I think the same thing is going on with the project now. each steam bubble hits the aluminum sheet with a small charge and builds until it jumps.or is held by the plywood aluminum box as a capacitor...
my thinking anyway lol.
note.
Never did get a chance to add mercury or 'other" added to aluminum to get a amalgam, bet it would be interesting.
The mortar mixed with steel dust is interesting.. thin coat to build up
Time to build just one reaction area to test the mixes.
Sorta like the sun swishing the earth
test one.
The whole thing is fuel in a magnetic field
.. not much to this small one.
round small foam ball that will fit between the steel rods. after a slow heat they can be the ball lightning areas ''i think''
test set up
ya understand a microwave magnetron.....
a ways to go yet
this is just one of the nods for testing .. no way will I try the 14 node
Just one for the math.if it works like the first one you can understand my looking for help for the 17 ..
no lid or wires yet, but the top screen.
I'm under the impression that The 'vibration state' = expatiation of time of composition starts small and grows as time passes.
like forging a sword to compress space. it starts 2 feet long then in a 10000000 years its 6 feet long.
Slowly accelerating a comp state you would think would create.= likely we will not be able to check the vibration state changing of something from start to finish in a life time without accelerating the decay of a given subject within a given time.
lenr will likely turn out to be a self compressing state within decay rates of ? what ever it is... or devise mechanism.
Looking for a slower 'vibration state of matter would be looking back in time.
To go back to earth when it was new, just find the vibration state from 60 mil years ago..
jester..
Still like to change things to learn more. from older to newer to see what if..
Need to be shore it dry dry before filling it up with "Water'
waffle rock area Sedimentary rocks/stone
just going to crush them up and add salt and water.
Then add it to the void area at the top of the mixed magnet field
with luck..
may help
almost.done
Like rubbing your feet on the carpet
the last of it.
just add water salt and chrome vanadium dust inside the ball.//
magnetism's will do the rest
It will rub away over the years
from the aluminum cap plate -
My way of getting low voltage from the high voltage spark.
pasted-from-clipboard.png as the spark fly's off to the wood aluminum box ect
capacitor/ starter. with luck if it back feeds
