I want to tell you, what was the focus of a successful A.Rossi day experiment E-Cat.
As is known A.Rossi first reactor were made of metal (steel) tube, which was also provided with a supply of hydrogen gas at a pressure of 40 atmospheres during reactor operation.
Now look at the process from the perspective of ordinary chemistries.
1. The adsorption of gas adsorbent is always accompanied by heat, chemical adsorption is accompanied by a very high heat.
2. The absorption of hydrogen nickel powder prevents the chemical bond, how strong the case of Raney nickel. A strong chemical bond is formed with palladium, titanium. Therefore, by heating the nickel powder is easy to hydrogen desorption.
3. As is known, hot hydrogen easily permeates through steel and other metals, other than gold and silver. Therefore, shut-off valves covered with a layer of silver or gold. Other metals other than iron ultrapure not found in nature, which can hold hot hydrogen gas. Only quartz glass also retains hydrogen.
4. In the reactor A. Rossi with hydrogen gas under high pressure, heating the nickel powder occurs due to adsorption of hydrogen, the heater is turned on when the periodicity of the hydrogen is desorbed and leaves in the air atmosphere through the wall of the steel pipe, which is "transparent" for hydrogen.But an observer can not see it with my own eyes. When the left part of the hydrogen reactor pressure of hydrogen increases again over the nickel powder and the adsorption process is repeated. Therefore, a hydrogen balloon near the reactor for continuous replenishment of the gas inside of the reactor.
5. Heat the nickel powder is needed for desorption of hydrogen gas to the saturation point has not come, when to stop the reaction. High pressure is needed to more hydrogen adsorbed nickel and allocate more heat from the chemical reaction.The reactor vessel (steel wall) must pass through the hydrogen, to avoid saturation occurred. If you make the body of quartz glass, the heat release process quickly stops.
6. The process heat release is limited in time and capacity of the pressurized hydrogen gas cylinder. It can work from one day to a week. Then the process stops. We conducted a series of experiments and received confirmation. This focus in the circus when the observer sees no escaping hydrogen through the steel pipe wall and thinks that sealed system.
Therefore, short-term demonstration of the installation of E-Cat has been successful, but it is cheating, and heat is generated by an additional chemical reaction of nickel with hydrogen and energy spent on compression of hydrogen to high pressure in the tank for storage.If you cover the inside of the steel casing of the reactor A. Rossi gold or silver, thereby eliminating the leakage of hydrogen through the pipe wall, then there is no heat generation, in addition to the initial absorption is not.Therefore A.Rossi easily deceived and prestaviteley industrial heat and journalists that they saw no leakage of hydrogen and a chemical reaction within the reactor.