How did they get superconductivity in a nanotubes of tungsten disulfide ?
in aniticipation I aleady pulled my next project, what's in my containers are more fun ~
The door is open and wedge,
Storing gravimetrically in its own field hopefully~
Membrane abstract wave spin~ distraction
Kicking of the reaction from a pre heat microwave to the nanopartices "not what he did" and then adding in the needed electrons within the stainless or chromoly /Vanadium body as a containment vessel" would likly be horrifying, like a baby supernova in your kitchen.
My first was 4130ss, it also vaporized instantly.
With the door open and so meny others working in this area, this may be the best time. Maybe others with more than optimism will come out of the wood work if science has their back.
Microwaves to superfluid
6 Cathodes 1 mercury tube, 6 antenna magnetron
Magnetic pulse electrical induction sequence of the tungsten cathode and the induced microwave trapping the microwave in a rotating stream of mercury after
second pules of a magnrtic field moves the matter from the antenna area of the magnetron past the cold cathode to the rotating mercury entering a ceramic body.
a sequence of left and right rotation releasing the microwave into a hematite claybody.
rising temperatures from the relase of microwaves within the confines of the mercury liquify the hematite in a none hardend path/tube and creat a conductive superfluid.
Bla Bla Bla
Q and design are Driving me nuts!
Not much I can do about RF tuning ect. and I'm not using tungsten, Chrome wire will be used to test.
1sr odd event.
My first fire in the kiln and I lost 2 parts and had a odd event. The wire in this design was obliterated in the 900 degree maximum fire. 20 strands of copper wire.
the part did not have continuos carbon track, it was design to jump at each crossing fro the bottom grove to the top cap to produce arcing. This part had 10 hours under 200 degree drying time with no damage to the wire. Anomaly damage to the wire I can't explain yet, and why the photographs are so blurry.
Adding wood fire kiln as weather gets better. The electric kiln kicks off odd reaction in pre-loaded parts, carbon.Nichrome ect.
That report looks like a bunch of crap - seeding to derail others from looking to do this type of research. Some new world order bait ~
Any type of stain on the table under the bottle?
What we have on excitonium is limited at this time.
Descrbed simular as game of pool, as the cue is used to spread the rack throughtout the table.
After the hit, all the particles of matter expand and dissipate.
My first idea to see if any reaction existed was to run a spark throught hematite dust, not much happened. then I added carbon dust mix in the hematite and observed
an odd effect. as you would think. the carbon added jump points for the spark but it should get weaker with less intensity. A fly back coil avage jump is 1/4" if a
longer jump is detected it should be a weaker spark. That not exactly what happened...
I built a tube and added the mix within the tube with a cathode at each end, the tube being a clay/hematite ceramic not as a insulator but as a second exit
output. For this output I added a salt water cap as a capture devise, but it was useless, I have no way to measure what it is producing.
I gave up on this and moved along.
more tinkering, I noticed the unders and over tubes of some old stone art. the process reminds me of a constant rotation of the right hand rule.
can a rotation motion pull in a loose unorganized matter using a magnetic field and the voltage as a piggyback to complete the ciruit to ground. -build something to test it.
The body of clay hematite having trapped particles suspended in it would only need small passages that can allow a reaction to manifest and allowed to start the
decay/release of the excitonium matter wave.
The only thing I can think of that will alow a lot of physical contact with the hematite body is mercury.
geometry of vortex coils ect. to have a magnetic field keeping the matter in a organized state long enough to enter the mercury. in my theory start with the production of
excitonium in a type of tesla coil.
My assumptions start to stack up here.
As mercury can be a type of one way valve/recifier and a tesla coil as the piggyback. the use of murcury in a tube through the
primary and secondary winding of a tesla coil built in the same body may allow the use of the coil to piggyback on murcury and shuttle the matter to the clay body.
as a mono pole antenna to the mercury releasing it throughout the trapped particles using water outside the body as ground.or just dig a hole and bary a portion of it in the dirt.
All the parts are just me thinking with my hands. I do better bleading on my projects before I try to explain them.
Anything to do with a self sustaining reaction or the use of this type of energy as direct power still needs lot of work.
This process as it is I beleive will be a monopole attenna wireless power. but nothing we can use just yet without a receiver converter design and Lots of wishful thinking.
Give me a day or so to write up the theory to fit the science. I will do my best to explain all this.
The thought of deception blocks all paths to the truth that what you need is not the same as what we wont. The lie starts within all of us. so a true reveal is automaticlly a lie.
1st thing I found out.. mercury leaks out of the smallest imperfection. I upgraded my electrical service cables ect to sustain 2500.+ Hopefully the next batch will tighten up that last little bit.
The last bodys built, starting the EVO microwave coils.
Seems the smallest cotton string in a flat area will not close up after heating, but cotton string around a pipe type clay body will. Also monofilament and 3D plastic will melt and travel to the lowest point and can/will harden and close the hole." small diameter material".
merc pump tesla coil first attempt cores.
Cant forget the other stuff
Mercury passages in the body for magnetics is tricky and a little frustating
Fingers crossed they will make it easy to explain it.
Setting up a EVO generator assist may help get the high state,
Set up like a tesla coil but no solid wire.
Mortar hematite carbon mix over cotton string "as wire" /burn out the cotton and in case with ceramic,
Nasty little bastard.
I'm wondering if a string embededded within a configuration like this one is burned out during firing would act similar to how a tornado forms within a storm cloud if an EM type matter was introduced to the void as an arc spark traveled along the outside of the conductive case would it be able to steer a matter plasmoid to a focused point.
Did you ever try obsidian the same way?
Good Hunting All ;;~
Yeah, the excitonium reations the hart of my project and from the story, they are not going to do any follow up.
Just like EXCITONIUM, until names are added to some of the effects that are being created, its hard to get everyone on the same page.
A few of them did not crack.
still making parts .
EVO gen. and a accelerator