I hope at some point some one will do the math using magnetic mercury field lines within the rotational attraction to see if it will go beyond.
Seiber Troutman
Member
- Member since Oct 5th 2017
- Last Activity:
Posts by Seiber Troutman
-
-
Also..
Adding degradation failure fibers
This construction can also allow a type of pre failure warning by adding a degradation failure fibers around each added circumference lair.
Preload tension pressure interruption from the 11 layers can show draw.
-
The way I think of it.
Steel aluminum and carbon
Mixing steel and aluminum create galvanic corrosion and in dust form happens rapidly. \
add the mix in a clay ceramic with carbon at 5% clay.the rate of decay is about the same
if it was in a pile on the floor.
If this was the first 1" at the center of a 12" ball.
each new layered inch of new material PPMs of the mix are changed,it will change the rate of the expansion from the first 1" core.
Given a path to exit for the sake of theory if the mix was hot, the inner core would escape quickly leaving the remaining reaction within the
inner wall.
The reaction would not likely continue using the path of the now gone highly galvanically eroded path the reaction now has a
slower rate new mix of PPMs to keep the reaction going.
If a magnetic field catalyst outside the 12" ball as a control can now be a variable rate cell that can be
manipulated to faster or slower degradtion.
I'm sure this is written down someplace on the net but I can't find it.
-
Still likely listed as a hypothesis but the mixing of material shielding -A proton (charge +e, mass mp), a deuteron (charge +e, mass 2mp), and an alpha particle, (charge +2e, mass 4mp) are accelerated through a common potential difference ΔV. Each of the particles enters a uniform magnetic field B, with its velocity in a direction perpendicular to B....etcetera. non uniform field. maybe...
-
Is you reactor case a induction heating coil type Alan?
-
Not that much difference~ what it creates can be shielded from the source.
-
Kanthal A1 "I use 26" is a superior wire, used this way within a body made of ... with the electric field will bla bla bla. yes it will.
-
How did they get superconductivity in a nanotubes of tungsten disulfide ?
-
-
Surprising what's just laying around~
https://www.disclose.tv/comment/11752
External Content youtu.beContent embedded from external sources will not be displayed without your consent.Through the activation of external content, you agree that personal data may be transferred to third party platforms. We have provided more information on this in our privacy policy.
-
-
Storing gravimetrically in its own field hopefully~
-
Membrane abstract wave spin~ distraction
-
Kicking of the reaction from a pre heat microwave to the nanopartices "not what he did" and then adding in the needed electrons within the stainless or chromoly /Vanadium body as a containment vessel" would likly be horrifying, like a baby supernova in your kitchen.
-
My first was 4130ss, it also vaporized instantly.
-
Removed
-
With the door open and so meny others working in this area, this may be the best time. Maybe others with more than optimism will come out of the wood work if science has their back.
-
a question, If we now see similar phenomena. How do we communicate this to them? (SAFIRE team)
http://www.safireproject.com/contact.html
All I see on them.
-
Microwaves to superfluid
6 Cathodes 1 mercury tube, 6 antenna magnetron
Magnetic pulse electrical induction sequence of the tungsten cathode and the induced microwave trapping the microwave in a rotating stream of mercury after
second pules of a magnrtic field moves the matter from the antenna area of the magnetron past the cold cathode to the rotating mercury entering a ceramic body.
a sequence of left and right rotation releasing the microwave into a hematite claybody.
rising temperatures from the relase of microwaves within the confines of the mercury liquify the hematite in a none hardend path/tube and creat a conductive superfluid.
Bla Bla Bla
Q and design are Driving me nuts!
3/12
Not much I can do about RF tuning ect. and I'm not using tungsten, Chrome wire will be used to test.
3/16
1sr odd event.
My first fire in the kiln and I lost 2 parts and had a odd event. The wire in this design was obliterated in the 900 degree maximum fire. 20 strands of copper wire.
the part did not have continuos carbon track, it was design to jump at each crossing fro the bottom grove to the top cap to produce arcing. This part had 10 hours under 200 degree drying time with no damage to the wire. Anomaly damage to the wire I can't explain yet, and why the photographs are so blurry.
3/19
Adding wood fire kiln as weather gets better. The electric kiln kicks off odd reaction in pre-loaded parts, carbon.Nichrome ect.
3/28
first fire part 1800. loading for last fire.
whewellite
https://www.mindat.org/min-4276.html
https://www.healthline.com/nut…nt-types-of-salt#section2
rock salt seem best.
Now Adding sea salt and rock salt to the Clay body mix. "needed"~
mirco ...
-
That report looks like a bunch of crap - seeding to derail others from looking to do this type of research. Some new world order bait ~