So far I have followed this story, there have been no really astonishing results or any new discovery what could be important for promoting LENR, or am I wrong?
There should be a number of promising experiments that could be candidates for replication with that financial support.
DU ammunition is obviously simply cheaper than tungsten and Ukraine is far away from US...win / win for US to dispose nuclear waste....
Historical tritium in rain. Wow! 1000X. Must be LENR
....thanks for making fun of us! Don't you have something better to do?
You have no idea how difficult it is to get some funds and try to setup experiments, as long as we still have to fight against dogmas. Your "support" here is not productive!
In the Chilean system of grid tied home solar power generation we are charged around USD 18 cents per kWh consumed and we get paid around USD 3.8 cents per injected to the grid.
Don't support the energy mafia and invest in more battery storage!
The phasing out of nuclear power stations will lead to a disappearing need for technical and scientific knowledge in the field of nuclear energy. There will be no more technical and scientific innovation in this area. In Germany."
Then we will see a next leap forward in other areas, I am sure.... e.g. check out
CMblu .
https://www.cmblu.com/en/home/
Conventional nuclear power plants are just too problematic.
We need sustainable, non harmful technology!!
A video by CleanHME presenting their research
I would like to give them credit and respect, while working on LENR as a scientific institution. I think for many universities there is still this dogma not to touch LENR. Unfortunatley not much activity at universities in Switzerland, Germany or Austria. At least so far I know...unfortunatley .
...nothing really new and probably a scam...
Do you think that Richter’s Project Huemul was really for LiD?
There also was the story that the uranium for the third bomb (trinity was the first) came from Germany...
2. In this system the temperature of the sample and holder is not well controlled, nor even directly..
...The main take home from them is to be careful with errors in QH (the holder emitted power).
Did you consider in your argumentation, that obviously an R type TC is used to control heater temperature?
notice also they mention 'freely movable temperature sensors - I guess this is to move them in and out of the induction zone
I see a (stainless steel) tube in the centre, probably closed, which would allow that.
I had a brief chat with one of the principals of Ecoengieering (Switzerland) at ICCF-25 where they presented a poster. Basically what they are doing is using inductance heating at 100kHz to activate a hollow cylinder
Any info what material is used for the hollow cylinder..... quartz tube closed at one end?
I should mention that members of the French and Japanese societies are affiliated members of the ISCMNS, so if they are also LENR-forum members they are welcome to use the ISCMNS area.
Thanks Alan,...
Two questions....Is this thread only visible to ISCMNS members?
Our colleague Jacques Ruer mentioned that there will be a meeting in France next year, to bridge the long period to the next ICCF in Japan in 2025? What is the reason anyway for this long delay? Thx.
nothing more happened in EU.
we have to learn it now in the hard way.. ...key SHOULD HAVE been to invest in innovative energy autarky in EU the last thirty years. Now we have to build up our own military AND the military of Ukraine AND invest in energy autarky. Reduction of CO2 WOULD HAVE been a nice side effect. Thanks to a few greedy EU lobbiests!!!
Modern advanced nuclear fission reactors are an emerging green technology (and I can prove it.
Nowadays, we can read news like this...
https://www.cmblu.com/en/press-and-media/strabag-invests-100-million-euros-in-cmblu-energy/
Must be a promising technology!
On the other hand, there is also news like this...
The German government considers nuclear fission reactors - also new concepts - "...as a dead horse ..."
stated here:
So probably no considerable investment opportunity will be available here, as a result of lacking governmental support.
This is generally also not so good news for us LENR folks...
Then maybe they could sell it as a sports energy drink.
yeah, good marketing cashes in... a product with no value, but you may even afford a Douglas DC6B! But a nice airplane!
Cydonia , Femto Engineering answered me, they are unable to process holes in the range of 2 to 10 nanometers. Bummer.
Any activity with nano fabrication?
What became "Diamondis" and his promising X prize since last GREAT AND PROMISING iccf ?
Can't be too difficult to define clear parameters for an undoubtly reproduceable LENR reaction.... or is this an already a "too low hanging fruit" for the pro's ?
....in the end, only a few will benefit and a general price reduction will not reach the end consumer. OMV will cash in and the main share holder (state of Austria) will receive more dividends. Means less political pressure for a change towards renewable energy sources, unfortunatley.
However, a nice gift though....it should only be used wisely.
Well, there is unfortunately very small interest in replicating Mizuno.
Nobody except MFMP was able to perform a test.
Not exactly. ..... it is my understanding that a Mizuno replication only focuses on temperature as an output parameter.
No gamma flux or other parameters?
It is our approach, that in order to better understand what is going on, we need more parameters. Besides of course temperature and pressure .... gamma spectroscopy is important. Which makes the setup more complex. A full stainless steel setup is therefore not really helpful.
