An internal, thin Nickel sleeve with ground-in Palladium Black coating, maybe even instead of the mesh...
What do you mean by "ground-in Palladium Black coating"?
An internal, thin Nickel sleeve with ground-in Palladium Black coating, maybe even instead of the mesh...
What do you mean by "ground-in Palladium Black coating"?
To magicsound
It seems that Mizuno had an article on a method to treat stainless steel with a barrier for hydrogen. Is it possible that he uses this method on his reactor?
To DR. Mizuno:
Quote
Mizuno: 90% of the previous tests were DC power supplies. An AC power supply was also used, but there is no difference in the test results with heating. DC is easier to measure.
It would be also interesting to know the temperature of the heater and its active area.
Thanks
In Mizuno experiments, the power supply of the heater is DC or AC? and which voltage?
To: j9381
"If I get excess heat, what is the best gas to use to kill the excess heat "
Of course not a gas but why not vacuum the chamber with a primary pump?
Never had shingles before the MD told me to have the vaccine, since then I get it in my leg every year... Watch out for the Covid-19 vaccine!
Sorry, I was confuse, I thought that were the results from actual experiments,not from the calibration of the calorimeter...
Do you know if Mizuno has changed the temperature's parameters that he described in his paper with Jed Rothwell,does the range of LENR heat production appear between room temperature to about 100C?
Thanks Robert , when you say "quotient =20.maybe 10" Is that equivalent to COP? And the graph shown comes from reasonable guess(extrapolation), or from real results?
The graph showing Wex/g against the temperature (1/T) Is that power produced per gram of reactant (Ni mesh+Pa or D2)?