[quote='David','http://www.lenr-forum.com/forum/index.php/Thread/1269-Parkhomov-Paper-2015-03-26-English-pdf/?postID=3457#post3457']Thanks to [lexicon]Alexander Parkhomov[/lexicon] and Peter Gluck for the translation.
Thanks to Peter Gluck for the translation of my presentation into English. Only in one place there is an inaccuracy
Incorrectly:
For this reason the temperature measured by the thermocouple is higher than the temperature of the surface of the heater. At the temperature of 1200 C, near to the thermocouple the temperature of the surface of the heater. Thus, the reactor is producing only the heat necessary for attaining the temperature of 1070 C with no fuel, that is 800W and not 1100. Taking this in consideration, the thermal coefficient COP+800/330= 2.4.
Correctly:
For this reason the temperature measured by the thermocouple is higher than the temperature of the surface of the heater. At the temperature of 1200 C near to the thermocouple, the temperature of the heater surface is 1070 C. Thus, the reactor is producing only the heat necessary for attaining the temperature of 1070 C with no fuel. That is 800W and not 1100.
Taking this in consideration, the thermal coefficient COP=800/330= 2.4.
[lexicon]Alexander Parkhomov[/lexicon]