nkodama Member
-
Post
nkodama Replied to the thread MIZUNO REPLICATION AND MATERIALS ONLY.
(Quote from can)
You must focuse on the subtraction spectra in the insert of the figure-9.
The Fig9 has the very large peak at 700~800eV can not be Cs and can be gamma photo peak.
Please nota that 500eV and less than 100eV peak which can be caused by the… -
Post
nkodama Replied to the thread MIZUNO REPLICATION AND MATERIALS ONLY.
(Quote from eros)
you can access the nano-imprinter in
https://www.kyodo-inc.co.jp/en…cs/nanoimprint/index.html
>It rises question how to access nano-imprinter? Quite expensive machine, out of my budget. Sandpaper is less >than 1eur.. If
Nano-imprinter can… -
Post
nkodama Replied to the thread MIZUNO REPLICATION AND MATERIALS ONLY.
(Quote from eros)
Your spectra can have the peal at 500eV
Corrected 500eV=>500keV, 100eV=>100keV
Theoretcally on the mechanism that the Electron deep orbit can created the small atoms with electron deep orbit has the peak of less than 100keV and 500keV.
… -
Reaction (Post)
nkodama Reacted with
to eros’s post in the thread MIZUNO REPLICATION AND MATERIALS ONLY. (Quote from Wyttenbach)
Thanks for tip. I changed it to 5x and find that calibration can be done much better so adjusted energy trimmer too..
Hope it is correct now. First is Am calibration, second background in 2cm lead cave (but ~1.1m from reactor) and… -
Post
nkodama Replied to the thread MIZUNO REPLICATION AND MATERIALS ONLY.
(Quote from eros)
>>Any comments about spectrum?
Please refer to my post in the below link.
It summarizes my report on Cold fusion and gamma ray and nucleus model.
RE: nkodama's merged thread - Electrode shape, Neutron and gamma emission, energy transfer to… -
Post
nkodama Replied to the thread nkodama's merged thread - Electrode shape, Neutron and gamma emission, energy transfer to metal lattices in FPE, new nucleus model, Mizuno and the Iwamura patent.
(Quote from magicsound)
I correct my mistake.
It is not beast Ron but simple shot blast technique to make roughness. The head. Particle are used to make surface roughness and other techniques are available like planting etc. -
Post
nkodama Replied to the thread Clean Planet Ltd (Japan) updates.
(Quote from Rob Woudenberg)
https://www.prnewswire.com/new…l-heat-llc-300247317.html
Yes, IH has the conflict with Leonardo Corporation -
Reaction (Post)
nkodama Reacted with
to Alan Smith’s post in the thread Clean Planet Ltd (Japan) updates. Hi Daniel.
If this case is going to court, it is now 'sub judice' as the lawyers say, and you would be well advised to say nothing more. If CP win their case you could face damages yourself if you say too much.
The law is a lottery and you don't always win… -
Post
nkodama Replied to the thread nkodama's merged thread - Electrode shape, Neutron and gamma emission, energy transfer to metal lattices in FPE, new nucleus model, Mizuno and the Iwamura patent.
In the early pot on"MIZUNO REPLICATION", I found metal wire method, and it must be improved by the potential control because the cold fusion need the positive metal surface potential.
nano-powder' s efficiency is very good however their potential control… -
Post
nkodama Replied to the thread nkodama's merged thread - Electrode shape, Neutron and gamma emission, energy transfer to metal lattices in FPE, new nucleus model, Mizuno and the Iwamura patent.
(Quote from Cydonia)
>Now, compression is needed to vibrate at higher frequency. Higher means the good one in my mind.
this is the same mechanism of mine, at surface T site compression create the small hydrogen or small-D2.
I think the resonance mean the… -
Post
nkodama Replied to the thread nkodama's merged thread - Electrode shape, Neutron and gamma emission, energy transfer to metal lattices in FPE, new nucleus model, Mizuno and the Iwamura patent.
(Quote from Cydonia)Refer to My Cold Fusion Cold fusion and CP patent [PCT/JP2019/048396] by Iwamura-san
I think this patent may have clue to change the reaction site adjustment. I think that reaction site is surface T site, but they think that reaction… -
Post
nkodama Replied to the thread nkodama's merged thread - Electrode shape, Neutron and gamma emission, energy transfer to metal lattices in FPE, new nucleus model, Mizuno and the Iwamura patent.
(Quote from nkodama)
I do not see the all of patent figure , so I am notsure of the invention, however Mizno is using Rod type electrode sorrounded by wire cage, so that is mainly from FPE, but it can generate the larger power with proper D absorption,… -
Post
nkodama Replied to the thread nkodama's merged thread - Electrode shape, Neutron and gamma emission, energy transfer to metal lattices in FPE, new nucleus model, Mizuno and the Iwamura patent.
(Quote from Cydonia) -
Post
nkodama Replied to the thread nkodama's merged thread - Electrode shape, Neutron and gamma emission, energy transfer to metal lattices in FPE, new nucleus model, Mizuno and the Iwamura patent.
>he is close to your understanding however not exactly the same way
It is important that nano-particle mechanism and cold FPE, Cold Fusion mechanism.
I think nano-particle works, it can be improved with technique to apply the voltage to nano… -
Post
nkodama Replied to the thread NASA’s updated Lattice Assisted Nuclear Fusion revamped site (Have Fleischmann and Pons been finally vindicated?).
(Quote from Rob Woudenberg)
I do not think that they understand the mechanism of ColdFuion. Cold Fusion do not generate the neutron but FPE can generate the neutron.please read my paper, which I explain the both mechanism. I will send you the manuscript.
… -
Post
nkodama Replied to the thread Rossi-Blog Comment Discussion.
(Quote from Cydonia)
I read this patent application but no meaning of invention because at that time Cold Fusion has no mechanism explanation, they just want to use the phenomena of hydrogen storage metal with D absorption is reported to generate the… -
Post
nkodama Replied to the thread Clean Planet Ltd (Japan) updates.
(Quote from Rob Woudenberg)
I read Japanese patent by CP nad they never mentioned the mechanism but they told that hydrogen move through hydrogen storage metal can create the excess energy and that schematic is showing this mechanism????
Tey used the wire… -
Post
nkodama Replied to the thread NASA’s updated Lattice Assisted Nuclear Fusion revamped site (Have Fleischmann and Pons been finally vindicated?).
I know many researchers thought that very high density of D cause fusion and I think it is reasonable, but experimental data of hydrogen population in nanoparticle shows that hydrogen occupied surface T site.
Thus I think the compression at surface T site… -
Post
nkodama Replied to the thread nkodama's merged thread - Electrode shape, Neutron and gamma emission, energy transfer to metal lattices in FPE, new nucleus model, Mizuno and the Iwamura patent.
(Quote from Cydonia)
Firstly I strongly recommend you to read my report on Cold Fusion.
===>change to
you should read my latest post on Mizuno's patent.
I think it is very good as a patent, because it fixes the issue of FPE with D2O electrolysis by using… -
Thread
nkodama Posted the thread nkodama's merged thread - Electrode shape, Neutron and gamma emission, energy transfer to metal lattices in FPE, new nucleus model, Mizuno and the Iwamura patent.
The total heat generation is mainly determined by the D supply.
Because FPE use the Pd Rod with very large volume, it takes a long time to introduce in Pd bulk, and it takes very long time to trigger Cold Fusion.
Oppositely CP method is by far better…