Nils Member
- Male
- from Hamburg Germany
- Member since Jan 23rd 2021
- Last Activity:
- Reactions Received
- 5
- Points
- 30
- Profile Hits
- 665
-
Nils Reacted with
to me356’s post in the thread MIZUNO REPLICATION AND MATERIALS ONLY.
Today we have confirmed excess heat generation with Mizuno style reactor even at 70°C - the reactor from photo I sent. Until now we never performed calibration at such low temp.
Reactor is loaded with only one mesh 20x20cm yet the COP is over 1.2 even at… -
Nils Reacted with
to THHuxleynew’s post in the thread Clean Planet Ltd (Japan) updates.
(Quote from RobertBryant)
If Clean Planet deliver a clearly COP > 1 device, as they expect their "industrial prototype" to be.
(1) the world will change
(2) LENR will be clearly the best thing since sliced bread
I don't expect this, since they have not… -
Nils Reacted with
to fabrice DAVID’s post in the thread ARPA-E LENR funded projects news and updates.
For one who falls, ten will rise again! My dear colleagues and fellow seekers in this quest for the elusive Grail of free and abundant energy, do not despair! For we are standing at the threshold of a great breakthrough, a turning point in the history of… -
Nils Reacted with
to barty’s post in the thread Brillouin Energy Corporation (BEC) updates..
Oh no, please no cryptocurrency scams and promo in one sentence with LENR... -
Nils Reacted with
to orsova’s post in the thread ARPA-E LENR funded projects news and updates.
(Quote from JedRothwell)
With apologies, I meant that it’s not clear to me that your characterisation of the funded work as being unduly focused on neutrons is correct. I didn’t mean to suggest that heat is not the primary signature of LENR. On that… -
Nils Reacted with
to me356’s post in the thread MIZUNO REPLICATION AND MATERIALS ONLY.
My findings from the run are following.- Filling reactor with D was much better than previous time. Yet I would recommend around 100 times slower filing than now. The faster hydrogen gets inside more is trapped inside the mesh. Amount of D that is intended
-
Nils Reacted with
to magicsound’s post in the thread MIZUNO REPLICATION AND MATERIALS ONLY.
I've finished a substantial upgrade to my DAQ system and the MR6 reactor. Integration of the RTD device has yielded some insight into the effect of hydrogen pressure on the cell calibration, as shown on the chart below. You can see that at 50 Pa or less… -
Nils Reacted with
to magicsound’s post in the thread MIZUNO REPLICATION AND MATERIALS ONLY.
(Quote from Alan Smith)
Yes, sorry for that, a trailing character deleted itself....here's the correct (and tested) link:
https://tinyurl.com/ybcfb4bz -
Nils Reacted with
to barty’s post in the thread MIZUNO REPLICATION AND MATERIALS ONLY.
Please try to stay on topic!
This thread is about Mizuno's Reactor, not Rossi. -
Nils Reacted with
to Paradigmnoia’s post in the thread MIZUNO REPLICATION AND MATERIALS ONLY.
The main thing is that this thread does not become the new Rossi replacement thread.
It does seem to be warming up for a shot at it. -
Nils Reacted with
to me356’s post in the thread MIZUNO REPLICATION AND MATERIALS ONLY.
Daniel_G: Thank you very much that you are here and shared lot of valuable data. I hope you will still stay here.
Total cost to build Mizuno-like reactor is roughly 500 USD if you can weld. I hope more replicators will come. As I said earlier, anyone… -
Nils Reacted with
to THHuxleynew’s post in the thread MIZUNO REPLICATION AND MATERIALS ONLY.
This is maybe one of those arguments it is good to be patient and steer clear of till better evidence emerges. It has been stated this will happen, and all sides will find the results of this better evidence interesting. Given the size of the claimed… -
Nils Reacted with
to Daniel_G’s post in the thread MIZUNO REPLICATION AND MATERIALS ONLY.
(Quote from JedRothwell)
I run tech companies in other fields and things don’t always go according to plan. In fact they almost never do. The ICCF24 data was not perfect but not bad. What exactly do you have a problem with? It was early data by an… -
Nils Reacted with
to Rob’s post in the thread Brillouin Energy Corporation (BEC) updates..
(Quote from Alan Smith)
I don't think this description is accurate. Their device has certainly been tested, quite extensively. Brillouin runs their reactors over very long duration tests with continuous data collection, and this isn't secret, Robert has… -
Nils Reacted with
to me356’s post in the thread MIZUNO REPLICATION AND MATERIALS ONLY.
You are right it is not that easy, especially at low pressure. Simply hydrogen must circulate throught the reactor. This is what makes COP high or low. -
Nils Reacted with
to Wyttenbach’s post in the thread The church of SM physics.
Today I added a new paper to research_gate https://www.researchgate.net/p…67405461_Basics_of_fields
Physics journals do not like news that refute century old claims and contradict standard books of physics like Jackson.
Basic finding:: There are no real… -
Nils Reacted with
to magicsound’s post in the thread MIZUNO REPLICATION AND MATERIALS ONLY.
I rebuilt my reactor, now with an internal heater and some exterior insulation. Initial calibration went well, though some further testing is needed before adding the treated meshes sent by me356. Here's my live doc showing some build details and the…