 # Randell Mills GUT - Who can do the calculations?

• The problem in this reasoning is that precision does not increase the spin from h/2 to h in the (x,z) plane. The spin is a vector proportional to an area, in fact proportional to the magnetic moment squared. Mills says that, the x,z projections of the precision vector of h gives 1/2h and 1/4h what is correct(see GUT-CP figure 1.25). The resulting total spin (x,z) is then 0.559016994374947( (1/2)2 + (1/4)2)1/2. An other problem is that Mills talks of 60 degrees, what is correct if you use spherical harmonics modeling but this is the opening angle of the precision cone, that circulates around the central axes middle = 30 degrees! In fact h(x) 1/4 is not a "stable value" it's the magnitude of the spin precision component x of (x,z) in average it is "0" as spin does not add dissipative energy to a particle - added flux is just compensating the magnetic field and if the field vanishes the the two opposing fields annihilate!

To get the maximal possible h you have to add all 3 dimensions. But as mentioned earlier. Only orthogonal spin values can be summed up! The mistake Mills made is to either to assume that the magnitude of the S vector is constant h what is wrong or that S is circulating at a constant angle... or else an phi=45 degrees S would be > 1...

If things start to precess I would expect torque free precession. But I can't see that that is used. In recent versions of GUTCP there is a section that shows why the 60 degrees is needed. It is balansing of torques.

• If things start to precess I would expect torque free precession. But I can't see that that is used. In recent versions of GUTCP there is a section that shows why the 60 degrees is needed.

Where ?

If it's torque free then he should explain the magnitudes of (X,Y) when R passes by... This only works if he thinks that the coordinates are rotating but then there is no precision movement at all.

Anyway the charge surface of the electron is a 4D torus - too and things look quite a bit different but the current loops are much easier to prove. No precision (axes torque movements) could exactly be what happens in 4D when the energy is added in 2D to the perturbative (non relativistic) mass. There will be a one time short tilt.

• Where ?

If it's torque free then he should explain the magnitudes of (X,Y) when R passes by... This only works if he thinks that the coordinates are rotating but then there is no precision movement at all.

Anyway the charge surface of the electron is a 4D torus - too and things look quite a bit different but the current loops are much easier to prove. No precision (axes torque movements) could exactly be what happens in 4D when the energy is added in 2D to the perturbative (non relativistic) mass. There will be a one time short tilt.

No I assumed torque free precession of the loops and tried to see if that could give something. If you download the latest version an look at the section discussing the precession you

will find a note about torque balance, that I found interesting.

I also revisited the g-factor. The g factor mills derive is independent of mass, and yes the myon seam to have the same g factor as the electron.

• No I assumed torque free precession of the loops and tried to see if that could give something. If you download the latest version an look at the section discussing the precession you

will find a note about torque balance, that I found interesting.

This is all clear - why it must be torque free.. but what happens if S-vector passes the (X,Z) plane as it should!

• This is all clear - why it must be torque free.. but what happens if S-vector passes the (X,Z) plane as it should!

Not sure I will put this on ice for now. But I have also reflected about Mills circular movements and the speed of light reference frame.

I can't really understand his derivation and it is weird that such a transform is derived in third party sources. There are specific rules to

follow and I think they are correct. But due to another reason. I envision that when the outside interacts with the electron it has to insert

the fluxon or photon as it encircles the electron with wavelength 2 pi r. But if instead we consider the intrinsic fields and physics we have

the photon performing a standing wave and hence here the wave length is r. Please see

• I envision that when the outside interacts with the electron it has to insert

the fluxon or photon as it encircles the electron with wavelength 2 pi r.

According to 4D rules a photon makes one rotation where as the electron makes two (at light speed). A photon captured by the electron must acquire a second dimension rotation with light speed, but then we had to divide its mass/energy by alpha.

But.. the recent electron modeling for the Hydrogen model shows that the electron is split into relativistic mass and perturbative mass. Adding the photon mass to the perturbative/ non relativistic mass indeed requires a division by 2 pi! which tells that there is a deceleration in one dimension. This also works fine in the neutron and other models.

• It is a loooong way from a cold plasma with few ions and electrons at a temperature of 1/10th of a Kelvin in a high-tech lab to a commercial product...quite a bit different from one we have seen that seems to be made of home depot parts • According to 4D rules a photon makes one rotation where as the electron makes two (at light speed). A photon captured by the electron must acquire a second dimension rotation with light speed, but then we had to divide its mass/energy by alpha.

The "two rotations" concept is consistent with experimental pion data.

Mass (pion+) = 139.6 MeV/c2.

Compton wavelength = h/(mc^2) = 8.8fm

Reduced Compton wavelength = Compton wavelength / (2 PI) = 1.4fm

Half the Reduced Compton wavelength is = 0.7fm

The experimental pion mean charge radius is around 0.68fm.

• Cosmological update angle on GUTCP

From Brett Holverstott.. now. 8.15 am East Australian time

https://medium.com/@brett.holv…-with-a-bang-1da364efcaa3

"But Mills’s cosmological work was based on an entirely new theory of quantum gravity, based in turn on his entirely new theory of atomic and particle physics.

Due to this language barrier, his work remains largely unknown in the scientific community, but the 1995 edition of his treatise in the Library of Congress will be a patent reminder of his prediction."

The GUTCP Millsian language is a headache for me

But paracetamol or acetaminophen relieves it a bit

• "But Mills’s cosmological work was based on an entirely new theory of quantum gravity, based in turn on his entirely new theory of atomic and particle physics.

Due to this language barrier, his work remains largely unknown in the scientific community, but the 1995 edition of his treatise in the Library of Congress will be a patent reminder of his prediction."

Unluckily Mills stopped his work to early, after the important - exciting - first insight he got. So he failed to discover the universal laws of mass energy production given by the transport of magnetism from 3D,t to SO(4). But this does in no way invalidate his findings about the cosmos. But definitely his writing about the strong force is wrong.

Mills is the only physicist in the last 40 years that made/brought real progress in the large. So he is the grandfather of NPP2.0.

• Mills is the only physicist in the last 40 years that made/brought real progress in the large

Despite Mills accuracy his modelling/ predictions on atomic properties the last few decades

have seen almost zero acceptance, acknowledgement

The barrier to acceptance is not as Brett Holverstott states... a language barrier.

Its Plancks funeral barrier ..which is even higher than the Coulomb barrier.

• I really liked this article and its predecessor. His writing style is pretty clear and I think he is making a very good job in giving an idea about certain topics from Mills theoryframework.